Search results

Individuals have 180 days to complete training from the start of the program and receive an OSHA course completion card upon finishing.

Note: OSHA recommends outreach courses as an orientation to occupational safety and health for workers. However, some states have enacted laws mandating the training. Some employers, unions, organizations and other jurisdictions may require this training.

OSHA Policies:

• OSHA has issued a policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 10-Hour courses. As a result, all 10-Hour courses must be delivered over a minimum of two days.
• OSHA has also issued a policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).

**This course does NOT meet the requirements in New York City**

OSHA 10-Hour Construction training sets the cornerstone for a safe and productive construction site. This comprehensive training helps keep your company in compliance and prevent costly accidents, incidents and OSHA fines at your site.

Courses include:

• Introduction to OSHA
• Construction Fall Protection
• Slips, Trips, and Falls
• Scaffold Safety
• Electrical Safety: General Awareness
• Electrical Safety: Hazards, Controls, and Best Practices Overview
• Lockout Tagout
• PPE: Fundamentals
• PPE: Head Protection
• PPE: Eye and Face Protection
• PPE: Hearing Protection
• Overhead and Gantry Crane Safety
• Mobile and Elevating Work Platforms: Aerial and Scissor Lift Safety
• Excavation, Trenching, and Shoring Safety
• Silica Hazards
• Asbestos Hazard Awareness
• Hazard Communication
• Compressed Gas Safety
• Stairway Safety
• Ladder Safety
• Hand and Power Tool Safety
• Hand Safety Overview
• Fire Extinguisher Safety
• Hot Work

Individuals have 180 days to complete training from the start of the program and receive an OSHA course completion card upon finishing.

Note: OSHA recommends outreach courses as an orientation to occupational safety and health for workers. However, some states have enacted laws mandating the training. Some employers, unions, organizations and other jurisdictions may require this training.

OSHA Policies:

• OSHA has issued a policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 10-Hour courses. As a result, all 10-Hour courses must be delivered over a minimum of two days.
• OSHA has also issued a policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).

SPANISH OSHA 10 Hr Construction

**This course does NOT meet the requirements in New York City**

OSHA 10-Hour Construction training sets the cornerstone for a safe and productive construction site. This comprehensive training helps keep your company in compliance and prevent costly accidents, incidents and OSHA fines at your site.
Courses include:

• Introduction to OSHA
• Construction Fall Protection
• Slips, Trips, and Falls
• Scaffold Safety
• Electrical Safety: General Awareness
• Electrical Safety: Hazards, Controls, and Best Practices Overview
• Lockout Tagout
• PPE: Fundamentals
• PPE: Head Protection
• PPE: Eye and Face Protection
• PPE: Hearing Protection
• Overhead and Gantry Crane Safety
• Mobile and Elevating Work Platforms: Aerial and Scissor Lift Safety
• Excavation, Trenching, and Shoring Safety
• Silica Hazards
• Asbestos Hazard Awareness
• Hazard Communication
• Compressed Gas Safety
• Stairway Safety
• Ladder Safety
• Hand and Power Tool Safety
• Hand Safety Overview
• Fire Extinguisher Safety
• Hot Work

Individuals have 180 days to complete training from the start of the program and receive an OSHA course completion card upon finishing.

Note: OSHA recommends outreach courses as an orientation to occupational safety and health for workers. However, some states have enacted laws mandating the training. Some employers, unions, organizations and other jurisdictions may require this training.

OSHA Policies:

• OSHA has issued a policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 10-Hour courses. As a result, all 10-Hour courses must be delivered over a minimum of two days.
• OSHA has also issued a policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).

**This course does NOT meet the requirements in New York City**

OSHA 10-Hour training helps prevent costly accidents, incidents and OSHA fines at your site.
Courses include:

• Introduction to OSHA
• Emergency and Fire Preparedness
• Fire Extinguisher Safety
• Fire Extinguisher Inspection
• Electrical Safety: General Awareness
• Electrical Safety: Hazards, Controls, and Best Practices Overview
• Lockout Tagout
• PPE: Fundamentals
• PPE: Head Protection
• PPE: Hearing Protection
• PPE: Hand Protection
• PPE: Foot Protection
• Hazard Communication
• Workplace Signs, Labels, and Tags
• Chemical Safety
• Compressed Gas Safety
• Flammable Liquid
• Industrial Ergonomics
• Office Ergonomics
• Employee Safety Orientation
• Behavior-Based Safety Overview
• Ladder Safety
• Personal Fall Arrest Systems
• Scaffold Safety
• Slips, Trips, and Falls
• Stairway Hazards
• Hand Safety Overview
• Machine Guarding

Individuals have 180 days to complete training from the start of the program and receive an OSHA course completion card upon finishing.

Note: OSHA recommends outreach courses as an orientation to occupational safety and health for workers. However, some states have enacted laws mandating the training. Some employers, unions, organizations and other jurisdictions may require this training.

OSHA Policies:

• OSHA has issued a policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 10-Hour courses. As a result, all 10-Hour courses must be delivered over a minimum of two days.
• OSHA has also issued a policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).

SPANISH OSHA 10 Hr General Industry

**This course does NOT meet the requirements in New York City**

OSHA 10-Hour training helps prevent costly accidents, incidents and OSHA fines at your site.
Courses include:

• Introduction to OSHA
• Emergency and Fire Preparedness
• Fire Extinguisher Safety
• Fire Extinguisher Inspection
• Electrical Safety: General Awareness
• Electrical Safety: Hazards, Controls, and Best Practices Overview
• Lockout Tagout
• PPE: Fundamentals
• PPE: Head Protection
• PPE: Hearing Protection
• PPE: Hand Protection
• PPE: Foot Protection
• Hazard Communication
• Workplace Signs, Labels, and Tags
• Chemical Safety
• Compressed Gas Safety
• Flammable Liquid
• Industrial Ergonomics
• Office Ergonomics
• Employee Safety Orientation
• Behavior-Based Safety Overview
• Ladder Safety
• Personal Fall Arrest Systems
• Scaffold Safety
• Slips, Trips, and Falls
• Stairway Hazards
• Hand Safety Overview
• Machine Guarding

Individuals have 180 days to complete training from the start of the program and receive an OSHA course completion card upon finishing.

Note: OSHA recommends outreach courses as an orientation to occupational safety and health for workers. However, some states have enacted laws mandating the training. Some employers, unions, organizations and other jurisdictions may require this training.

OSHA Policies:

• OSHA has issued a policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 30-Hour courses. As a result, all 30-Hour courses must be delivered over a minimum of four days.
• OSHA has also issued a policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).

**This course does NOT meet the requirements in New York City**

OSHA 30-Hour Construction training sets the cornerstone for a safe and productive construction site. This comprehensive training helps keep your company in compliance and prevent costly accidents, incidents and OSHA fines at your site.

Course Titles Include:

• Introduction to OSHA
• Intro to Personal Safety
• Behavior-Based Safety
• Process Safety Management
• Workplace Hazard Recognition
• Incident Investigation
• OSHA Work-Related Injury and Illness Recordkeeping
• Slips, Trips, and Falls
• Construction Fall Protection
• Scaffold Safety
• Electrical Safety: General Awareness
• Electrical Safety: Hazards, Controls, and Best Practices
• Lockout Tagout
• Arc Flash and Electrical Safety Best Practices
• Overhead and Gantry Crane Safety
• Mobile and Elevating Work Platforms: Aerial and Scissor Lift Safety
• Dropped and Fallen Objects
• Intro to Caught-In or Between
• Excavation: Trenching and Shoring Safety
• PPE: Fundamentals
• PPE: Head Protection
• PPE: Eye and Face Protection
• PPE: Hearing Protection
• PPE: Hand Protection
• PPE: Foot Protection
• PPE: Respiratory Protection
• Respiratory Protection
• Compressed Gas Safety
• Silica Hazards
• Hearing Conservation
• Eye Safety
• Stairway Hazards
• Ladder Safety
• Mobile Ladder Safety
• Confined Space Entry: Permit Required
• Rigging Safety
• Conveyor Safety
• Hazard Communication
• Workplace Signs, Labels, and Tags
• Chemical Safety
• Industrial Ergonomics
• Office Ergonomics
• Emergency and Fire Preparedness
• Extinguisher Safety
• Extinguishers Monthly Inspections
• Forklift - Fundamentals
• Forklift - Load Handling
• Forklift - Stability and Capacity
• Forklift - Inspection and Maintenance
• Powered Industrial Truck Safety
• Winter Weather Driving
• Asbestos Hazard Awareness
• Lead Awareness
• Intro to Combustible Dust Hazards
• Formaldehyde Safety
• Intro to Spray Finishing Hazards
• Intro to Hexavalent Chromium Hazards
• Intro to Benzene Hazards
• Intro to Beryllium Hazards
• Flammable Liquid Safety
• Intro to Cadmium Safety
• Employee Safety Orientation
• Back Safety and Injury Prevention
• Bloodborne Pathogens
• Fatigue and Stress Awareness
• Cold, Flu, and Transmissible Illness Prevention
• Mosquito, Tick, and Vector-Borne Illnesses
• Workplace Cleanliness
• Hand Safety
• Hand and Power Tool Safety
• Machine Guarding
• Hot Work
• Cold Stress
• Heat Stress
• Violence in the Workplace
• Earthquake Preparedness
• Hurricane Preparedness

 

 

Individuals have 180 days to complete training from the start of the program and receive an OSHA course completion card upon finishing.

Note: OSHA recommends outreach courses as an orientation to occupational safety and health for workers. However, some states have enacted laws mandating the training. Some employers, unions, organizations and other jurisdictions may require this training.

OSHA Policies:

• OSHA has issued a policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 30-Hour courses. As a result, all 30-Hour courses must be delivered over a minimum of four days.
• OSHA has also issued a policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).

SPANISH OSHA 30 Hr Construction 

**This course does NOT meet the requirements in New York City**

OSHA 30-Hour Construction training sets the cornerstone for a safe and productive construction site. This comprehensive training helps keep your company in compliance and prevent costly accidents, incidents and OSHA fines at your site.
Course Titles Include:

• Introduction to OSHA
• Intro to Personal Safety
• Behavior-Based Safety
• Process Safety Management
• Workplace Hazard Recognition
• Incident Investigation
• OSHA Work-Related Injury and Illness Recordkeeping
• Slips, Trips, and Falls
• Construction Fall Protection
• Scaffold Safety
• Electrical Safety: General Awareness
• Electrical Safety: Hazards, Controls, and Best Practices
• Lockout Tagout
• Arc Flash and Electrical Safety Best Practices
• Overhead and Gantry Crane Safety
• Mobile and Elevating Work Platforms: Aerial and Scissor Lift Safety
• Dropped and Fallen Objects
• Intro to Caught-In or Between
• Excavation: Trenching and Shoring Safety
• PPE: Fundamentals
• PPE: Head Protection
• PPE: Eye and Face Protection
• PPE: Hearing Protection
• PPE: Hand Protection
• PPE: Foot Protection
• PPE: Respiratory Protection
• Respiratory Protection
• Compressed Gas Safety
• Silica Hazards
• Hearing Conservation
• Eye Safety
• Stairway Hazards
• Ladder Safety
• Mobile Ladder Safety
• Confined Space Entry: Permit Required
• Rigging Safety
• Conveyor Safety
• Hazard Communication
• Workplace Signs, Labels, and Tags
• Chemical Safety
• Industrial Ergonomics
• Office Ergonomics
• Emergency and Fire Preparedness
• Extinguisher Safety
• Extinguishers Monthly Inspections
• Forklift - Fundamentals
• Forklift - Load Handling
• Forklift - Stability and Capacity
• Forklift - Inspection and Maintenance
• Powered Industrial Truck Safety
• Winter Weather Driving
• Asbestos Hazard Awareness
• Lead Awareness
• Intro to Combustible Dust Hazards
• Formaldehyde Safety
• Intro to Spray Finishing Hazards
• Intro to Hexavalent Chromium Hazards
• Intro to Benzene Hazards
• Intro to Beryllium Hazards
• Flammable Liquid Safety
• Intro to Cadmium Safety
• Employee Safety Orientation
• Back Safety and Injury Prevention
• Bloodborne Pathogens
• Fatigue and Stress Awareness
• Cold, Flu, and Transmissible Illness Prevention
• Mosquito, Tick, and Vector-Borne Illnesses
• Workplace Cleanliness
• Hand Safety
• Hand and Power Tool Safety
• Machine Guarding
• Hot Work
• Cold Stress
• Heat Stress
• Violence in the Workplace
• Earthquake Preparedness

Individuals have 180 days to complete training from the start of the program and receive an OSHA course completion card upon finishing.

Note: OSHA recommends outreach courses as an orientation to occupational safety and health for workers. However, some states have enacted laws mandating the training. Some employers, unions, organizations and other jurisdictions may require this training.

OSHA Policies:

• OSHA has issued a policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 30-Hour courses. As a result, all 30-Hour courses must be delivered over a minimum of four days.
• OSHA has also issued a policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).

**This course does NOT meet the requirements in New York City**

OSHA 30-Hour training helps prevent costly accidents, incidents and OSHA fines at your site.
Courses include:

• Introduction to OSHA
• Employee Safety Orientation
• Back Safety and Injury Prevention
• Workplace Hazard Recognition
• Incident Investigation
• Slips, Trips, and Falls
• Scaffold Safety
• Emergency and Fire Preparedness
• Fire Extinguisher Safety
• Fire Extinguisher: Monthly Inspections
• Active Shooter Response
• Earthquake Preparedness
• Hurricane Preparedness
• Tornado Preparedness
• Electrical Safety: General Awareness
• Electrical Safety: Hazards, Controls, and Best Practices
• Lockout Tagout
• Arc Flash and Electrical Safety Best Practices
• PPE: Fundamentals
• PPE: Head Protection
• PPE: Eye and Face Protection
• PPE: Hearing Protection
• PPE: Hand Protection
• PPE: Foot Protection
• PPE: Respiratory Protection
• Hazardous Material Transportation: Handling Non-Bulk Packages
• Powered Industrial Truck Safety
• Intro to Loading Dock Safety
• Intro to Pallet Jack Safety
• Intro to Safe Material Storage
• Conveyor Safety
• Overhead and Gantry Crane Safety
• Hazard Communication
• Industrial Ergonomics
• Office Ergonomics
• Workplace Signs, Labels, and Tags
• Chemical Safety
• Compressed Gas Safety
• Flammable Liquid
• Intro to Spray-Finishing Hazards
• Intro to Hexavalent Chromium
• Intro to Benzene Hazards
• Intro to Beryllium Hazards
• Chlorine Safety
• Formaldehyde Safety
• Hydrogen Sulfide Safety
• Intro to Combustible Dust Hazards
• Preventing Spills
• Confined Space Entry: Permit Required
• Cold Stress
• Heat Stress
• Hand and Power Tool Safety
• Intro to Personal Safety
• Behavior-Based Safety
• Process Safety Management
• Forklift - Fundamentals
• Forklift - Safe Driving
• Forklift - Load Handling
• Forklift - Stability and Capacity
• Forklift - Inspection and Maintenance
• Mobile Elevating Work Platforms - Aerial and Scissor Lift Safety
• Winter Weather Driving
• Passenger Van Driver Safety
• Respiratory Protection
• Eye Safety
• Hearing Conservation
• Indoor Air Quality
• Intro to Mold and Mildew Hazards
• Laser Safety
• Intro to Cadmium Hazards
• Liquid Nitrogen Safety
• X-Ray Safety
• Hot Work
• Bloodborne Pathogens
• Personal Fall Arrest Systems
• Stairway Hazards
• Ladder Safety
• Mobile Ladder Safety
• Cold, Flu, and Transmissible Illness Prevention
• Fatigue and Stress Awareness
• Mosquitos, Tick, and Vector-Borne Illnesses
• OSHA Work-Related

Individuals have 180 days to complete training from the start of the program and receive an OSHA course completion card upon finishing.

Note: OSHA recommends outreach courses as an orientation to occupational safety and health for workers. However, some states have enacted laws mandating the training. Some employers, unions, organizations and other jurisdictions may require this training.

OSHA Policies:

• OSHA has issued a policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 30-Hour courses. As a result, all 30-Hour courses must be delivered over a minimum of four days.
• OSHA has also issued a policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).

SPANSIH OSHA 30 Hr General Industry?

**This course does NOT meet the requirements in New York City**

OSHA 30-Hour training helps prevent costly accidents, incidents and OSHA fines at your site.
Courses include:

• Introduction to OSHA
• Employee Safety Orientation
• Back Safety and Injury Prevention
• Workplace Hazard Recognition
• Incident Investigation
• Slips, Trips, and Falls
• Scaffold Safety
• Emergency and Fire Preparedness
• Fire Extinguisher Safety
• Fire Extinguisher: Monthly Inspections
• Active Shooter Response
• Earthquake Preparedness
• Hurricane Preparedness
• Tornado Preparedness
• Electrical Safety: General Awareness
• Electrical Safety: Hazards, Controls, and Best Practices
• Lockout Tagout
• Arc Flash and Electrical Safety Best Practices
• PPE: Fundamentals
• PPE: Head Protection
• PPE: Eye and Face Protection
• PPE: Hearing Protection
• PPE: Hand Protection
• PPE: Foot Protection
• PPE: Respiratory Protection
• Hazardous Material Transportation: Handling Non-Bulk Packages
• Powered Industrial Truck Safety
• Intro to Loading Dock Safety
• Intro to Pallet Jack Safety
• Intro to Safe Material Storage
• Conveyor Safety
• Overhead and Gantry Crane Safety
• Hazard Communication
• Industrial Ergonomics
• Office Ergonomics
• Workplace Signs, Labels, and Tags
• Chemical Safety
• Compressed Gas Safety
• Flammable Liquid
• Intro to Spray-Finishing Hazards
• Intro to Hexavalent Chromium
• Intro to Benzene Hazards
• Intro to Beryllium Hazards
• Chlorine Safety
• Formaldehyde Safety
• Hydrogen Sulfide Safety
• Intro to Combustible Dust Hazards
• Preventing Spills
• Confined Space Entry: Permit Required
• Cold Stress
• Heat Stress
• Hand and Power Tool Safety
• Intro to Personal Safety
• Behavior-Based Safety
• Process Safety Management
• Forklift - Fundamentals
• Forklift - Safe Driving
• Forklift - Load Handling
• Forklift - Stability and Capacity
• Forklift - Inspection and Maintenance
• Mobile Elevating Work Platforms - Aerial and Scissor Lift Safety
• Winter Weather Driving
• Passenger Van Driver Safety
• Respiratory Protection
• Eye Safety
• Hearing Conservation
• Indoor Air Quality
• Intro to Mold and Mildew Hazards
• Laser Safety
• Intro to Cadmium Hazards
• Liquid Nitrogen Safety
• X-Ray Safety
• Hot Work
• Bloodborne Pathogens
• Personal Fall Arrest Systems
• Stairway Hazards
• Ladder Safety
• Mobile Ladder Safety
• Cold, Flu, and Transmissible Illness Prevention
• Fatigue and Stress Awareness
• Mosquitos, Tick

 

 Designed for healthcare providers and public safety professionals. Covers rapid assessment, basic life support skills, CPR, AED use, and relieving choking for adults, children, and infants, emphasizing critical thinking and teamwork.

Audience: Nurses, doctors, first responders, and dental professionals.

This course reflects science from the 2020 American Red Cross Guidelines for CPR and ECC.

The AHA’s BLS course trains participants to promptly recognize several life-threatening emergencies, give high-quality chest compressions, deliver appropriate ventilations and provide early use of an AED. Reflects science and education from the American Heart Association Guidelines Update for CPR and Emergency Cardiovascular Care (ECC).

 

Who should take this course?

The AHA’s BLS Course is designed for healthcare professionals and other personnel who need to know how to perform CPR and other basic cardiovascular life support skills in a wide variety of in-facility and prehospital settings.

 

What does this course teach?

• High-quality CPR for adults, children, and infants
• The AHA Chain of Survival, specifically the BLS components
• Important early use of an AED
• Effective ventilations using a barrier device
• Importance of teams in multirescuer resuscitation and performance as an effective team member during multirescuer CPR
• Relief of foreign-body airway obstruction (choking) for adults and infants

Meet with Owner/Founder Deena Moore.  She has a decade of experience in business and non profit work, having founded 2 businesses and 2 non profits.  

During our meeting you will be able to share your vision and get feedback as well as best practices and next steps. 

Pursue your dream TODAY!

A comprehensive, video-based, instructor-led course that teaches students critical skills needed to respond to and manage an emergency until emergency medical services arrive. Content includes first aid; choking relief; and CPR and AED use for adults, children, and infants.

Audience: Anyone with little or no medical training who needs a course completion card for their job (OSHA requirements) or other regulatory requirements.

This course reflects science from the 2025 AHA Guidelines for CPR and ECC.

Bloodborne Pathogens Training Online can be good for a range of occupations:

• Laboratory Personnel
• Healthcare Professionals
• Education Professionals
• Janitorial and Maintenance Staff
• First Responders (e.g., EMTs, Paramedics, Police/Fire)
• Lay Responders
• Tattoo Artists & Piercers
• Construction Workers
• And more!

Designed for those who are at risk of on-the-job exposure to blood and other bodily fluids in the workplace. The course teaches staff how bloodborne pathogens are spread, how to avoid exposure, and what to do if exposed to infectious material. This course is one of the requirements of the OSHA Bloodborne Pathogens Standard. After taking this course, students should talk with their employer about their workplace’s specific policies and procedures. Those who complete the training receive a Bloodborne Pathogens Training certification valid for one year.

Note: After taking this course, students should talk with their employer about their workplace’s specific policies and procedures.

This is the hands-on skills session for the HeartCode® BLS blended learning program.

Audience: Healthcare providers who prefer the flexibility of completing the cognitive portion of the course online at their own pace.

Prerequisite: You must complete the online HeartCode BLS course prior to attending this session. You will demonstrate high-quality CPR, AED use, and team dynamics to an instructor to receive your certification.

This course reflects science from the 2025 AHA Guidelines for CPR and ECC.

This is the hands-on skills session for the HeartCode® BLS blended learning program.

Audience: Healthcare providers who prefer the flexibility of completing the cognitive portion of the course online at their own pace.

Prerequisite: You must complete the online HeartCode BLS course prior to attending this session. You will demonstrate high-quality CPR, AED use, and team dynamics to an instructor to receive your certification.

This course reflects science from the 2025 AHA Guidelines for CPR and ECC.

The hands-on session for the Heartsaver Total blended course.

Audience: Ideal for workforce training where employees need to minimize time away from the job.

Prerequisite: Students must complete the Heartsaver First Aid CPR AED Online course. This session verifies that the student can physically perform CPR, use an AED, and demonstrate first aid skills.

This course reflects science from the 2025 AHA Guidelines for CPR and ECC.

The skills verification session for the Heartsaver CPR AED blended course.

Audience: Individuals who need a flexible schedule for CPR certification.

Prerequisite: Completion of the Heartsaver CPR AED Online course. Students will practice chest compressions, breath delivery, and AED operation with an instructor.

This course reflects science from the 2025 AHA Guidelines for CPR and ECC.

This course helps students understand what bloodborne pathogens are (HIV, Hepatitis B & C) and how to reduce the risk of exposure for themselves and others. It assists in satisfying the training requirements of the U.S. Department of Labor, OSHA Bloodborne Pathogens Standard (29 CFR 1910.1030).

Audience: Any employee with a reasonable anticipation of contact with blood or OPIM.

This program conforms to the recommendations of the U.S. Department of Labor Occupational Safety and Health Administration (OSHA) Best Practices Guide.

This course teaches participants how to recognize life-threatening bleeding and intervene effectively using three main methods: direct pressure, wound packing, and the use of a tourniquet (both commercial and improvised).

Audience: Community members, workplace safety teams, and security personnel.

This program conforms to the 2020 International Consensus on First Aid Science with Treatment Recommendations and the 2020 AHA and ARC Focused Update for First Aid.

The American Heart Association is always seeking professionals to conduct training in CPR, AED, First Aid, and Advanced Cardiovascular Care. If you are passionate about saving lives, motivated to facilitate learning, feel comfortable in group settings, and find it easy to make complex concepts understandable to others, you may be a perfect candidate.

Intended Audience

This course trains individuals to become certified HSI instructors. It covers teaching methodology, learning styles, course administration, and skills evaluation.

Audience: Individuals who wish to teach HSI First Aid and CPR programs to others.

This program relies on established models, theories, and principles of instructional design and training development that have been integrated into HSI training program brands for more than 40 years.

The hands-on skills session for HSI's blended learning program.

Audience: Corporate employees who need flexibility.

Prerequisite: Completion of the HSI online course. Students will practice and be tested on CPR compressions, AED use, and first aid skills.

This program conforms to the 2020 AHA Guidelines Update for CPR and ECC and the 2020 AHA and ARC Focused Update for First Aid. It is based on the 2020 International Consensus on CPR and ECC Science with Treatment Recommendations (CoSTR)

The hands-on component of the Red Cross Blended Learning program.

Audience: Busy professionals who need OSHA-compliant certification.

Prerequisite: Completion of the Red Cross "SimLearning" online course. This session focuses purely on practicing life-saving skills like high-quality CPR and controlling bleeding.

This course reflects science from the 2020 American Red Cross Guidelines for CPR and ECC.

The in-person skills session for the Red Cross BLS Blended Learning course.

Audience: Healthcare providers renewing their certification or seeking a flexible initial certification.

Prerequisite: Completion of the online BLS course. This session focuses on psychomotor skills and team response scenarios.

This course reflects science from the 2020 American Red Cross Guidelines for CPR and ECC.